Valves

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

For use with water or oil. multi-turn operation, 3/4 in hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.

Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the...

LASCO Self-Tapping Needle Valve, 1/4 in, Compression, Brass

Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water...

5/8 in OD (1/2 in nom. copper) x 3/8 in OD Chrome.

LASCO Ball Valve, 1/8 in, FIP x MIP, Lever Actuator, Brass

Rising stem, six-point cast-iron handle, 3/4 in hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.

Used to control the flow of water to household plumbing fixtures and appliances. Ideal for maintenance and repair without having to shut-off water to the entire home. Used where the...

LASCO Straight Needle Valve, 1/4 in, Compression, Brass

Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water...

Anderson Metals Straight Needle Shut-Off Valve, 1/4 x 1/8 in, Compression x MIP, Brass, Chrome

Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, solvent ends comply with ASTM 2846, certified to NSF 61.

GENOVA Boil Drain Valve, 3/4 in, Slip x MHT,-20 to 180 deg F, CPVC

3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.

Chrome.

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.

LASCO Ball Valve, 1/4 x 1/4 in, FPT x MPT, Brass

High-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free...

High-impact CPVC construction for use in hot or cold fluid systems up to 180 deg F. Use with water and approved chemicals. 1/2 in MHT outlet. Beige color body with...

-40 to 194 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G),...

Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, solvent ends comply with ASTM 2846, certified to NSF 61.

This unique valve employs the globe valve principle and is manufactured of high-temperature thermoplastics. It is designed to solvent weld to CPVC tubing. This valve employs Street or Socket feature...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free...

Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no...

400 psi WOG, 160 psi at 73 deg F, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant...