Valves

Anderson Metals Straight Needle Shut-Off Valve, 1/4 in, Compression, Brass

Double-threaded for use with 1-1/4 in or 1-1/2 in sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.

LASCO Ball Valve, 1/4 in, Compression, Lever Actuator, Brass

LASCO Angle Stop Valve, 1/2 x 3/8 in, FIP x Flare, Brass, Chrome

LASCO Ball Valve, 1/4 in, FIP x MIP, Lever Actuator, Brass

For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4 in compression connection and clamp will fit 3/8 in thru 1-3/8 in OD copper...

Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed....

B & K ProLine Washing Machine Valve, 1/2 x 3/4 in, Compression x Threaded, Brass, Chrome, Dimensions: 5/8 in OD, Includes: (12) Valves

Fits both SCH 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.

B & K Proline Bent Nose Garden Valve, 3/4 in, FIP x Hose, 3/4 in Port, Brass, Cast Iron Handle

Made of high-impact PVC Type II material. 1/2 lb spring gives positive seal with no back pressure. Reinforced poppet. Designed for any system where back flow is not desired. Spas,...

The drain and shut off cocks are highly dependable and an economical choice of fitting. One-piece brass body provides strength, durability and longer-lasting performance. Designed for use with non-potable water,...

Rising stem, 6-point cast iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.

LASCO Standard-Duty Angle Stop Valve, 5/8 x 3/8 in, Compression x Compression, Brass, Chrome-Plated

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

B & K ProLine Gas Ball Valve, 1/2 in, Flare x FIP, 200 psi, 175 deg F, Brass, Aluminum Handle, Chrome, Includes: (10) Gas Ball Valves

Arrowhead Brass Check Assembly, Brass, EPDM Softgoods, For: Arrowhead 420 Series Anti-Siphon Frost-Proof Wall Hydrants

The straight valve is most often used where the water pipe enters the room from the floor. With a 90 deg turn of the valve handle, you are able to...

The straight valve is most often used where the water pipe enters the room from the floor. With a 90 deg turn of the valve handle, you are able to...

arrowhead Brass Oval Replacement Handle, Oval, Aluminum, Green, Rubber-Coated, Suitable for: Arrowhead Valve, Includes: Self-Tapping Stainless Steel Screw

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.

LASCO Standard-Duty Angle Stop Valve, 1/2 x 1/2 in, FIP x IP, Brass, Chrome-Plated

LASCO Angle Stop Valve, 1/2 x 3/8 in, IP x Compression, Brass, Chrome-Plated

LASCO Straight Needle Valve, 3/8 in, Compression, Brass

LASCO Straight Needle Valve, 1/4 x 1/8 in, Compression x MIP, Brass

Chrome-plated.

Rising stem, neoprene seal washer, 3/4 in hose thread outlet, cast iron handle. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, code ends comply with ANSI...

GENOVA 53065 Angle Valve, 1/2 x 1/4 in, CPVC