Plumbing

Bagged.

NDS Flexee Pipe Tee, 1/2 in Nominal, Barb Connection, 80 psi Pressure, SCH 40 Schedule, 72 deg F, Acetal, 2.98 in Length, Suitable for: 1/2 in Polyethylene Tubing, SCH 40...

Southland 583 Pipe Nipple, 1/2 in, MIP, Iron, Schedule Rating: 40, 300 psi, 150 deg F Operating, Includes: (25) Pipe Nipples

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W

Anderson Metals Pipe Nipple, 1/2 in, MPT, 150 psi, 120 deg F Operating, For: Plastic Tubing or Rubber Hose

Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

GENOVA 300 Pipe Tee, Nominal Size: 3/4 in, Slip x Slip-Joint Connection, Schedule Rating: SCH 40, PVC, White

FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F....

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Anderson Metals Splicer, 3/8 in, Barb, 150 psi, 120 deg F, Nylon

The Vulcan thread sealing tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 deg elbows. A principal use is to offset piping over...

Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

Anderson Metals Splicer, 1/4 in, Barb, 150 psi, 120 deg F, Nylon

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the...

UDP Tubing, Nominal Size: 5/8 in, 3/4 in Dia Outside, 25 psi at 70 deg F, Operating Temperature: 25 to 150 deg F, Vinyl, Clear, 100 ft L, Suitable for:...

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Anderson Metals Splicer, 1/2 in, Barb, 150 psi, 120 deg F, Nylon

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Bagged.

Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

LASCO Nipple, Nominal Size: 3/4 in, IPS Connection, Schedule Rating: SCH 80, PVC, 2 in L, Includes: (10) Nipples

B & K ProLine Pipe Nipple, 1/2 in, MIP, Schedule Rating: 80, PVC, Gray, 4 in L, For: Schedule 40, 80 Piping Systems, Includes: (10) PVC Nipples