Plumbing

Charlotte Pipe Coupling, Nominal Size: 1-1/2 in, Hub Connection, Schedule Rating: SCH 40, PVC, White, Includes: (100) Couplings

ELKHART PRODUCTS Adapter, Push, Nominal Size 1: 3/8 in, Nominal Size 2: 1/2 in, Connection Type 1: Copper, Connection Type 2: Male, 200 psi, Operating Temperature: 200 deg F, Brass

GENOVA 500 Tube Tee, Nominal Size: 3/4 x 1/2 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC

Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

Anderson Metals Pipe Plug, 3/4 in, MPT, Hex Head, 150 psi, 120 deg F Operating

Anderson Metals Reducing Splicer, 3/8 x 1/4 in, Barb, 150 psi, 120 deg F, Nylon

EPC Tube Cap, 1/2 in, Sweat, Wrot Copper, 5/8 in Dia

PVC pressure pipe and fittings are used in outside cold water pressure applications. SCH 40 is used in applications, such as irrigation, underground residential sprinkler systems, water service pipe, deionized...

LASCO Nipple, Nominal Size: 1/2 in, NPT Connection, Schedule Rating: SCH 80, PVC, Gray, 5 in L

WATTS Micro Fuel Tubing, 1/4 in OD, 133 psi, 70 deg F Operating, Polyurethane, 100 ft L

GENOVA 500 Tube Tee, Nominal Size: 1/2 in, Slip x Slip-Joint Connection, 100 psi, Operating Temperature: 180 deg F, CPVC

Used to change direction in piping. Sometimes used in conjunction with a 12 in L CPVC tubing on long runs to absorb expansion. Bagged.

Anderson Metals Connector, 1/4 x 1/4 in, MIP x Barb, 150 psi, 120 deg F, Nylon

Anderson Metals Reducing Splicer, 1/2 x 3/8 in, Barb, 150 psi, 120 deg F, Nylon

Insert fittings are used with polyethylene (PE) pipe in buried cold water applications only, such as irrigation, residential lawn sprinkler systems, water service pipe and swimming pool installations. Insert fittings...

Keeney Beveled Washer, Specifications: Slip Joint Connection Size, Plastic, Dimensions: 1-1/4 in Dia

LASCO Pipe Elbow, Nominal Size: 1/2 in, Insert x FPT Connection, Angle: 90 deg, 360 psi, Operating Temperature: 140 deg F, PVC, Gray

Charlotte Pipe Reducer Bushing, Nominal Size: 3/4 x 1/2 in, Spigot x Slip Connection, Schedule Rating: SCH 80, PVC, Gray

B & K Nipple, Nominal Size: 1/2 x 3 in, Polyethylene, Schedule Rating: SCH 40

Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.

Inserts into fitting hub to reduce to standard male pipe threads. PTFE thread tape is recommended for threaded joints.

GENOVA 300 Pipe Elbow, Nominal Size: 3/4 in, Slip x FIP Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC, White

GENOVA 300 Pipe Elbow, Nominal Size: 1/2 in, Slip Connection, Angle: 45 deg, Schedule Rating: SCH 40, PVC, White

Turn-Key® clamps offer innovative design and install with a simple hand twist. No tools are required. Remove the reusable plastic screw cap for a tamper-resistant connection. Also available in blister...

Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for...

Reel tubing is marked every foot with notch mark and UPC code.

Anderson Metals Pipe Nipple, 3/8 in, MPT, 150 psi, 120 deg F Operating, For: Plastic Tubing or Rubber Hose