Valves

BrassCraft® 3/8 in FIP inlet x 3/8 in OD compression outlet 1/4-turn straight valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The straight...

B & K Ball Valve, 1/2 in Connection, C x C Connection, Port Type: Full, 600 psi, Actuator Type: Handle, Temperature Rating: -20 to 300 deg F, Body Material: Brass,...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr....

125 psi WOG, rising stem, 6-point cast iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.

Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose...

LASCO Angle Stop Valve, 5/8 x 1/2 in, Compression x IP, Brass, Chrome-Plated

Includes vacuum breaker cap, underbody, O-ring and plunger. Air vent assembly for Arrowhead frost-free hydrants, 420 and 455BFP Series.

Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over...

Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 psig), CSA certified to ASME B 16.33 (5G), CSA certified to ASME...

Plumb Pak Stop Valve, 1/2 x 3/8 x 1/4 in, FIP x Compression x Compression, 3 Ports/Ways, Chrome, Media: Water, 2-3/4 in W x 1 in D x 2-1/2 in...

Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC...

BrassCraft® 3/8 in FIP inlet x 3/8 in OD compression outlet 1/4-turn angle valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The angle...

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression.

B & K 7701G Series Gate Valve, 3/8 x 1/2 in, Flare x FIP, 200 psi, -20 to 300 deg F, Brass

Chrome-plated.

-20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side...

Water supply stop valve with quarter turn brass ball. Used for faucet, water cooler, refrigerator, dishwasher and instantaneous hot water dispenser. Constructed of high-copper content brass body, brass stem, crack...

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.

TRUPER Bibb Faucet, 1/2 in Connection, Brass Body, Zinc Handle, Chrome, Dimensions: 7 cm H x 14 cm D, Includes: Nipple with String, Escutcheon, Chrome Tube

For hot or cold water In-line valve with PEX connections on both ends. Bar coded.

For hot or cold water In-line valve with PEX connections on both ends. Bar coded.

The 1 in plastic foot valve is used with jet and centrifugal pumps to filter debris from lakes, wells and ponds while keeping the pump primed. The thermoplastic valve is...

BrassCraft® 1/2 in Nom compression inlet x 1/4 in OD compression outlet 1/4-turn angle valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The...

BrassCraft® 1/2 in FIP inlet x 7/16 in and 1/2 in OD slip-joint outlet 1/4-turn angle valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing...

SharkBite Ball Valve, 3/4 in Barb x 3/4 in Barb Connection, Port Type: Full, 200 psi, Temperature Rating: 200 deg F, Media: Portable Water, Trim Material: Stainless Steel/Copper, Softgoods Material:...