Pipe Fittings

Inserts into fitting hub to reduce to smaller pipe size.

EPC 101R Series EPC 101R Series Reducer Coupler with Stop, 1/2 x 3/8 in, Sweat

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and...

Southland Galvanized Pipe Coupling, Nominal Size: 1/2 in, FIP Connection, 150 psi, Malleable Iron

B & K PROLINE Close Length Nipple, Nominal Size: 1-1/4 in, MIP Connection, Schedule Rating: SCH 80, PVC, Gray

Southland Hex Bushing, Nominal Size: 3/8 x 1/4 in, MIP x FIP Connection, 300 psi, Operating Temperature: 150 deg F, Malleable Iron, Includes: (10) Hex Bushings

Southland 511 Hex Bushing, 3/8 x 1/8 in, MIP x FIP, Iron, Includes: (35) Bushings

Used to adapt female pipe threads to CPVC tubing in cold water applications. Transition unions are recommended where hot water or changing water temperatures are likely to be encountered. PTFE...

Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.

Solvent welds into main line to provide a threaded branch line of the same size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Bulk.

Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.

Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.

Inserts into threaded fitting socket to reduce to smaller threaded opening. PTFE thread tape is recommended for threaded joints.

Plumb Pak Extension Tube, 1-1/4 in, Slip Joint, Material Specifications: PVC, White, 6 in L

Used to cap pipe. Conforms to ASTM D2466.

The galvanized cap is a class 150 malleable iron pipe fitting that is used for closing and terminating the male end of a pipe or fitting.

Southland Galvanized Pipe Cap, Nominal Size: 1/2 in, FIP Connection, 150 psi, Malleable Iron

Sioux Chief 878 & 879 series cleanout plug shall be used where necessary in drainage systems. Plug shall be made from glass-fiber reinforced polypropylene material for durability and chemical resistance....

SharkBite Crimp Reducing Elbow, Nominal Size: 3/4 x 1/2 in, Barb Connection, Angle: 90 deg, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Polymer

Streamline® copper solder joint fittings for supply/pressurized systems have been the leading brand of copper fittings for over 80 years. Available in both wrot copper and cast bronze, our product...

Southland Pipe Nipple, Nominal Size: 3/4 in, MIP Connection, Wall Thickness: 0.113 in, 1454 psi, Operating Temperature: 650 deg F, Schedule Rating: SCH 40, Carbon Steel, 1.38 in L

B & K Pipe Nipple, Nominal Size: 1/4 in, Schedule Rating: SCH 40, Steel

GENOVA 300 Street Pipe Elbow, Nominal Size: 3/4 in, Slip x MIP Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC, White

The SharkBite® PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite® PEX barb fittings are compatible for potable...

These black pipe caps are the perfect female NPT threads and are for connecting to a male pipe or fitting

Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.

Southland Plug, Nominal Size: 3/4 in, MPT Connection, Head Type: Square, 300 psi, Operating Temperature: 350 deg F, Iron

LASCO Compression Sleeve, Nominal Size: 5/16 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Wall Thickness: 0.032 in, Brass, Suitable for: Plastic and Copper Tubing